HZKM-1 Laboratory Portable Lubricant Additive Oil Friction Tester

HZKM-1 Laboratory Portable Lubricant Additive Oil Friction Tester

Huazheng HZKM-1 Laboratory Portable Lubricant Additive Oil Friction Tester The purpose of polished is to eliminate the impact of original film or nanometer film on the experimental results. 1. Fix the friction block into the short lever groove of the testing machine, add ordinary lubricant oil into oil...

HZKM-1 Laboratory Portable Lubricant Additive Oil Friction Tester

 

HZKM-1 lubricant oil friction tester

HZKM-1 lubricant oil friction tester

HZKM-1 lubricant oil friction tester

The lubricating oil anti-wear testing machine is a specialized instrument designed to evaluate the anti-wear performance of lubricating media. By accurately simulating real-world friction conditions, the machine determines the extreme pressure resistance and lubrication efficiency of oil products, providing reliable data for lubricant formulation, quality control, and performance verification.


--Application Fields--
Industrial equipment: hydraulic system/gearbox/turbine unit/bearing device/circulating lubrication system
Transportation: Diesel engines/Automotive lubricants/Transmission systems
Processing and manufacturing: metal cutting fluid/process oil
Special oil products: turbine oil/equipment specific lubricating oil


--Technical specifications--

Item Specification
Model Name Precision Lubricating Oil Wear Resistance Tester
Power configuration 230W/280W dual power mode
Measurement system 0.01mm high-precision sensor
Data display Dual mode: pointer mechanical instrument / digital display screen
Mechanical structure 13.745:1 golden ratio lever transmission system

 

Test Procedure

Step 1: Preparation – Fix the friction block into the short lever groove of the testing machine. Add ordinary lubricating oil into the oil box, then install the lubricating oil box and adjust the lever to the proper length.

Step 2: Baseline Test with Ordinary Oil – Start the motor and allow it to run. At set intervals (such as every 10 seconds), add weights one by one to the long lever end. Each weight corresponds to a friction pair pressure of 100 kg. Record the number of weights and observe the ammeter pointer. As the pointer rises, power consumption increases, fuel consumption increases, and noise increases. Continue adding weights-approximately 3 to 4 blocks-until the wheel stops and the machine locks. Quickly turn off the power. Remove the weights and the short lever, then observe the depth, area, and roughness of the grinding marks on the cylindrical grinding block.

Step 3: Re-polishing – Choose a different angle on the grinding block to install the lever. Polish the shaft sleeve again, ensuring it is polished flat to remove the wear generated during the previous experiment.

Step 4: Wear-Resistant Oil Test – Add our wear-resistant lubricating oil into the oil box.

Step 5: Comparative Testing – Add weights to the long lever end one by one. With ordinary oil, the machine locks after approximately four weights. With our wear-resistant lubricant, however, the machine continues to operate normally even after more than four weights are added. Observe the ammeter pointer-it moves only slightly. Since current × voltage = power consumption, a minimal pointer change indicates power saving, which translates directly to fuel saving. Gradually add weights up to 12, and the machine still operates as usual.

Step 6: Film Verification – Remove the oil box. The machine continues to operate as usual, confirming the existence of nano films. Turn off the machine switch.

Step 7: Final Comparison – Lower the grinding block to compare with previous grinding marks.

 

Packing List

No.

Item

Qty

1

Power line

1

2

Weight

3

3

Fasterings

1

4

Steel ring

1

5

Whetstone

2

6

Bracket

2

7

Ol cup

2

8

Standard steel ball for test

50

 

 

FAQ

 

1. When can I get a price quote?

You can contact us online or submit an inquiry. We typically provide a quote within 24 hours after receiving your request.

 

2. How do you handle after-sale service for overseas customers?

For issues occurring with our products, we offer:

12-month warranty coverage (see details below).

Online technical guidance to troubleshoot problems remotely.

Replacement parts shipped promptly based on your needs.

On-site support (if required): Our engineers can travel abroad to resolve critical issues.

IMG20241121162722

3. What is the warranty period?

Our standard warranty period is 12 months (1 year). During this time, we provide:

Free technical support.

Replacement parts for manufacturing defects.

Solutions tailored to your specific issue.

 

Products Cases

 

HZKM-104

 

Company Profile

 

af7e9172c2e3db1e6c4b786d81dd1ea7

 

Certification

 

Manufacturing-Price-Portable-Automatic-Current-Transformer-CT-PT-Testing-System 1

 

 

Related Products

 

 

product-750-1077

Send Inquiry

(0/10)

clearall