What are the apparatus used in transformer?
Jun 15, 2025
The term "apparatus used in a transformer" refers to both its core internal components and the external auxiliary equipment essential for its operation, protection, cooling, and monitoring. Here's a breakdown of the key apparatus:
Core:
Function: Provides a low-reluctance magnetic path to link the primary and secondary windings. Made from laminated silicon steel sheets to minimize eddy current losses.
Apparatus: Laminated steel core (usually E-I, cruciform, or shell-type construction).
Windings (Primary & Secondary):
Function: Conductors wound around the core where electromagnetic induction occurs. The primary receives input power; the secondary delivers output power.
Apparatus: Coils made of copper or aluminum conductors (solid, stranded, or foil), insulated with paper, enamel, or synthetic materials. Often wound concentrically or sandwiched.
Insulation System:
Function: Electrically isolates the windings from each other, from the core, and from the transformer tank/ground. Manages dielectric stress and heat.
Apparatus: Solid insulation (kraft paper, Nomex, pressboard barriers, angle rings, spacers), liquid insulation (transformer oil - mineral or ester-based), and air/gas (in dry-type transformers).
Tank (Main Tank):
Function: The main enclosure housing the core, windings, and insulation (oil). Provides mechanical protection and acts as a container for the cooling medium.
Apparatus: Welded steel tank, designed to withstand pressure/vacuum.
Bushings:
Function: Provide insulated electrical terminals for connecting high-voltage incoming (primary) and outgoing (secondary) cables or busbars to the windings inside the tank.
Apparatus: Porcelain or composite polymer insulators with a central conductor. Types include oil-filled, condenser, or dry-type bushings.
Cooling System:
Function: Dissipates heat generated by core (iron) and winding (copper) losses to maintain safe operating temperatures.
Apparatus:
Radiators: Finned tubes attached to the tank for natural oil circulation and convection cooling (ONAN - Oil Natural Air Natural).
Cooling Fans: Forced air blown onto radiators (ONAF - Oil Natural Air Forced).
Oil Pumps: Forced oil circulation through radiators or separate coolers (OFAF - Oil Forced Air Forced).
Coolers (Heat Exchangers): Separate units (air-cooled or water-cooled) where oil is pumped to be cooled externally.
Conservator Tank (Expansion Tank): Separate tank mounted above the main tank. Allows oil to expand and contract with temperature changes while minimizing contact with air. Often includes a breather.
Conservator Tank:
Function: Compensates for oil volume changes due to temperature fluctuations, preventing excessive pressure or vacuum in the main tank. Reduces moisture/oxygen ingress into the main oil body.
Apparatus: Cylindrical tank mounted above the main tank, connected via piping. Contains an air space.
Breather:
Function: Controls the moisture content of the air entering the conservator tank as the oil level changes.
Apparatus: Small container filled with silica gel desiccant (often colored to indicate moisture absorption - blue when dry, pink when saturated), attached to the conservator's air vent.
Tap Changer:
Function: Allows adjustment of the transformer's voltage ratio to compensate for input voltage variations or load changes, maintaining stable output voltage.
Apparatus:
Off-Load Tap Changer (DETC): Requires the transformer to be de-energized for adjustment. Simple selector switch.
On-Load Tap Changer (OLTC): Allows adjustment while the transformer is energized and under load. Complex mechanism with diverter switches, selector switches, transition resistors/reactors, and a motor drive.
Protection & Monitoring Devices:
Function: Detect internal faults, monitor health, and provide alarms or initiate shutdown to prevent catastrophic failure.
Apparatus:
Buchholz Relay: Gas detection relay mounted in the pipe between the main tank and conservator. Detects slow-developing internal faults (gas accumulation) and major faults (oil surge).
Pressure Relief Device (PRD): Rapidly vents excessive internal pressure caused by severe faults to prevent tank rupture.
Sudden Pressure Relay (SPR): Detects very rapid pressure rises within the tank, indicating major arcing faults.
Winding Temperature Indicator (WTI): Monitors the hottest spot temperature of the windings (often simulated using a thermal image technique).
Oil Temperature Indicator (OTI): Monitors the top-oil temperature.
Oil Level Gauge: Indicates oil level in the conservator.
Gas & Moisture Analyzers (DGA Monitors): Continuously or periodically analyze dissolved gases in the oil (key indicator of internal faults and insulation degradation).
Surge Arresters: Protect against high-voltage transients (lightning, switching surges) entering via the terminals.
Control Cabinet: Houses monitoring instruments, alarms, trip circuits, and OLTC controls.
Auxiliary Systems (for larger transformers):
Function: Support specific operational needs.
Apparatus: Oil pumps, cooling fan motors, OLTC motor drive unit, control power supply, local/remote control panels.
In Summary:
The essential apparatus includes the magnetic core, electrical windings, insulation system, tank, bushings, cooling system (radiators, fans, pumps, conservator), tap changer, and protection/monitoring devices (Buchholz relay, PRD, temperature gauges, DGA, surge arresters). The specific combination depends on the transformer's size, voltage rating, application, and cooling type.






