Contents of H-class dry-type transformer

May 18, 2024

SG (B) 10 non-encapsulated H-class dry-type transformer uses an insulation paper-based insulation system. It maintains excellent electrical and mechanical properties throughout the service life of the transformer. The insulation paper is not easy to age, is shrinkage-resistant and compression-resistant, and has strong elasticity, so it can ensure that the transformer coil remains tightly structured even after several years of use and can withstand the pressure of short circuits.
Main structure
1. The core is a step-by-step 45° full-bevel joint
2. The insulation between turns, layers, sections and insulation cylinders are all made of insulating paper or molded parts
3. The low-voltage coil is foil-type
4. The high-voltage coil is continuous
5. The body adopts special isolation and noise reduction measures
High-voltage coil
The high-voltage coil adopts a continuous structure with high mechanical strength and good heat dissipation conditions. The coil is wound on a molded insulation cylinder, and an insulating paper-wrapped flat copper wire is used as the conductor. The insulating material insulation paper is used between the layers. The coil is impregnated into a solid whole by VPI vacuum pressure, avoiding the shortcomings of high interlayer voltage, poor heat dissipation capacity, easy thermal breakdown and low mechanical strength of multi-layer cylindrical coils, thereby improving the reliability of product operation; it has excellent moisture resistance, can withstand thermal shock, never cracks, and has a partial discharge of <5Pc. It is easy to decompose and recycle after the life span to protect the environment.
Low-voltage coil
The low-voltage coil is a foil-wound structure. The coil is wound with high-quality copper foil and H-grade insulation material. The insulation system is made of insulating paper between layers. The coil is impregnated by VPI vacuum pressure to form a solid whole. The product structure features:
1. The coil has high mechanical strength and strong short-circuit resistance.
2. The coil has strong thermal shock resistance and improved product life.
3. The coil has strong "moisture-proof, dust-proof and salt spray-proof" capabilities.
Core
The core material is 0.2mm thick high-quality high-magnetic conductivity silicon steel sheet with 45° full oblique overlap. The core adopts a non-punching and pull-plate structure; the surface is coated with insulating paint, which is moisture-proof and rust-proof, with low loss and low noise. The operating noise is about 16db lower than the national standard, which can meet the national first-level residential area noise requirements.