100kV 5mA DC Hipot Tester
100kV 5mA DC Hipot Tester
video
100KV DC Hipot Tester
7
9
10
A
1/2
<< /span>
>

100kV 5mA DC Hipot Tester

The 100kV DC Hipot Tester is a high-voltage testing device used to perform high-voltage dielectric (insulation) tests on electrical equipment such as transformers, cables, motors, switchgear, and other power equipment. The primary purpose of the 100kV DC Hipot Tester is to apply a direct current (DC) voltage of up to 100,000 volts (100kV) to the insulation of electrical devices, ensuring that they can withstand high voltage without breaking down. This is crucial for verifying the dielectric strength of the insulation and ensuring the safe operation of electrical equipment.

 

Technical Parameters

 

Instructions For Use

Microammeter Support – To ensure stable and safe operation, it is recommended to support the high-voltage microammeter using good insulation materials (such as nylon tube or ABS tube) of the same height as the HZZGF DC high-voltage tester.

Connection Procedure – Connect the high-voltage output end of the HZZGF DC high-voltage tester to the high-voltage microammeter through the high-voltage current-limiting resistance. Then, using the special plug of the high-voltage microammeter, connect the shielded wire to the test subject.

Corona Reduction – To reduce the influence of corona ion current on the sample current when the high-voltage cable head of the test subject is exposed, wrap the high-voltage wiring of the test subject with good insulation.

Fiber-Optic Data Transmission – The meter features a fiber-optic interface that can send measured current information to the intelligent DC tester control box for display. In the system settings, select the microammeter and set it to [fiber optic].

Battery Replacement – Inserting the high-voltage lead plug connects the internal power; pulling it out cuts off the internal power. When "LOW BATTERY" appears on the LCD screen, the battery is under voltage. Remove the locking screw from the back cover, take off the back cover, unscrew the battery fixing screw, and replace the battery.

Charging Current Tolerance – During DC withstand voltage testing of cables or high-voltage capacitors, the charging current can exceed twice the rated current without damaging the meter.

Discharge Procedure – After completing the DC high-voltage test, discharge at the microammeter housing using the special discharge rod of the HZZGF DC high-voltage tester. Do not touch the high-voltage discharge directly with the discharge rod. When voltage is higher, keep a certain distance between the rod tip and the high-voltage side to produce corona discharge, allowing the voltage to decline gradually to 20% of the test voltage. Then discharge the microammeter housing, and finally ground the test subject directly.

Critical Warning – Never directly discharge the earth wire on the housing of the high-voltage microammeter. Doing so may damage the microammeter due to the strong impact discharge current.

Low-Power Standby – When the microammeter is powered on for 20 minutes with no current flowing, it enters low-power standby mode. The LCD displays "SLP" and detects current every 10 seconds.

 

Voltage (KV)/mA

Current (mA)

Control Box

High-Voltage Unit

 

Rated Voltage

Size (mm)

Weight kg

Size (mm)

Weight kg

100/2-5

100KV

310 * 250 * 230

6kg

550*260*220

8kg

 

 

Beijing Huazheng Technology Co., Ltd. was established in 2023, headquartered in Beijing, China. It is an enterprise with outstanding innovation capabilities in the field of high voltage testing equipment. Our mission is to provide customers with high-quality and efficient solutions, with the goal of promoting social progress and sustainable development. Our values are integrity, innovation, and collaboration, always putting customers first. Our strengths lie in our technical strength, quality control, customer service, and partnership.

 

What's the payment terms?

T.T with 30% downpayment,70% before shipment.or L/C at sight.

West Union also accept.

 

How long is your delivery time?

The general delivery time is 7-15 days. Most of our products have stock. Payment upon delivery

 

Do you provide sample ? Is it free?

Our products are high value samples, we need to collect the sample charge.

 

What is your terms of delivery?

We accept EXW, FOB, CFR, CIF, etc. You can choose the one which is the most convenient

or cost effective for you.

image001001

image003001

image005001

 

 

FAQ

 

1. When can I get a price quote?

You can contact us online or submit an inquiry. We typically provide a quote within 24 hours after receiving your request.

 

2. How do you handle after-sale service for overseas customers?

For issues occurring with our products, we offer:

12-month warranty coverage (see details below).

Online technical guidance to troubleshoot problems remotely.

Replacement parts shipped promptly based on your needs.

On-site support (if required): Our engineers can travel abroad to resolve critical issues.

IMG20241121162722

3. What is the warranty period?

Our standard warranty period is 12 months (1 year). During this time, we provide:

Free technical support.

Replacement parts for manufacturing defects.

Solutions tailored to your specific issue.

 

Products Cases

 

HZ-20A04

 

Company Profile

 

af7e9172c2e3db1e6c4b786d81dd1ea7

 

Certification

 

Manufacturing-Price-Portable-Automatic-Current-Transformer-CT-PT-Testing-System 1

 

 

Related Products

 

 

image013001

 

 

 

 

 

 

 

Send Inquiry

(0/10)

clearall