
High Voltage SF6 Gas AC DC Hipot Tester
When you open the box, check whether it is in good condition, paying particular attention to whether the connection ports are loose and whether the carbon brush is properly connected to the voltage adjuster.
High Voltage SF6 Gas AC DC Hipot Tester
High Voltage SF6 Gas AC DC Hipot Tester Usage and Maintenance
1.When you open the box, check whether it is in good condition, paying special attention to whether the connection ports are loose and whether the carbon brush is properly connected to the voltage adjuster.
2.Please strictly follow the procedure and read the manual first.
3.If it has not been in use for a long time, you should check the main circuit's insulation resistance using a 2500V MΩ meter, ensuring that the reading is not below 1.5 MΩ.
Technical Parameters
|
Model |
Capacity(KVA) |
High Frequency Voltage Output Voltage (KV) |
High Frequency Voltage Output Current(mA) |
Low Frequency Voltage input |
Ratio |
Tempera- ture(℃) raised/ 30 minute |
|||
|
AC |
DC |
AC |
DC |
V |
A |
||||
|
HZQ -15 |
15 |
150 |
210 |
100 |
100 |
380 |
37.5 |
1500 |
10 |
Note: 100KVA and the above input voltage may enhance to 3000V or proposed by the users.
Products Cases

Company Profile

Certification

Related Products
Send Inquiry









