HZYDP-30kV VLF AC Hipot Tester

Name: China HZYDP-30kV VLF AC Hipot Tester Manufacturers Suppliers Factory - Customized HZYDP-30kV VLF AC Hipot Tester - Huazheng Technology
Brand: Huazheng
SKU: 238595694

The VLF Hipot Tester operates at very low frequencies, enabling efficient testing of high-voltage insulation systems without risking damage to sensitive components. With its advanced technology, this tester provides high-voltage output while maintaining low frequency, ensuring thorough assessment of your equipment without compromising its integrity. Model★ M:HZYDP-30KV
Peak Voltage:30kV
Measuring Range: ≤1.1μF @ 0.1Hz
≤2.2μF @ 0.05Hz
≤5.5μF @ 0.02Hz
≤2.2μF @ 0.05Hz
≤5.5μF @ 0.02Hz

Send Inquiry

HZYDP-30kV VLF AC Hipot Tester

VLF AC Hipot Tester Technical Parameters

Model★ M	Peak Voltage	Measuring Range	Weight	Purpose
HZYDP-30KV	30kV	≤1.1μF @ 0.1Hz	Controller: 4kg Booster: 25kg	Cables, generators with voltage of 10kV and below
		≤2.2μF @ 0.05Hz
		≤5.5μF @ 0.02Hz
		≤2.2μF @ 0.05Hz
		≤5.5μF @ 0.02Hz

Main Technical Parameters of VLFS Series Ultra-low Frequency High-voltage Generator

★ Power supply: 220V±10%, 50±5%Hz

Note: When using a portable generator for power supply, it is essential that the output voltage and frequency remain stable. Generally, it is required that the generator's power be greater than 3 kW, with a frequency of 50 Hz and a voltage of 220V ± 5%. If these conditions are not met, appropriate measures should be taken to stabilize the generator's output.

★ Output voltage precision:

Degree of instability for peak value of output high voltage: ≤1%

Degree of instability for frequency of output voltage: ≤3%

Distortion rate of output voltage waveform: ＜5%

★ The instrument has the function of not burning the booster and the mainframe in case of power failure and sudden shutdown during the operation.

★ Temperature: –10°C to +40°C, Humidity: ≤85% RH

★Description of testing range:

The capacitance of the tested product must not exceed the maximum rated capacitance of the instrument, as shown in Table 1.

If the capacitance of the tested product is too low, the waveform may be affected. If it is lower than 0.05 µF, the instrument may not operate normally. In such cases, the auxiliary device (optional) provided by the company can be used.

For capacitance estimates of common electrical equipment, refer to Table 2, which includes the single-phase to ground capacitance of different types of generators.